Hitachi C2846TN

Latest TV repair tips and faults

All repair tips and service information on these pages are supplied as per our site terms & conditions PLEASE READ

id:= 016967
Dead with standby LED ok
Transistor Q951 - emitter o/c
(John Scotter)

id:= 017244
Goes off when warm
IC951 dry jointed
(Peter Nutkins)

id:= 013073
Procedure to remove code “C46TN” from screen
Tv is in factory set up mode, using remote, press two vcr rec buttons together, the menu will appear, then switch to standby, turn appliance back on and prompt should have disappeared

id:= 014474
Procedure to remove the model of tv from screen
Press both record buttons on remote, switch to standby then switch off at set wait 30SECs then switch back on

id:= 017991
TV model number is displayed on picture and cannot be removed
Now the clever bit press both record buttons in vcr section of handset, switch to standby then switch off at mains, wait approx 1 minute then switch on, now should be ok
(Steve b)

Do you have repair tips / fault reports for this model not listed above? Please send them in and help others who may be stuck !!
Click on the button at the top of this page - Many Thanks

Copyright © 2000 - 2003 - E.C.S (Technical Publishing)
Site Design & Layout © 2000
All Rights reserved

All Information is supplied as per our Site Terms.
Use of this site deems your acceptance of these terms.
Click links to view our Site Terms and Privacy Policy