Nec Video Model: VN23
Click here to return to the Miscellaneous Tips index page
All repair tips and service information on these pages are supplied as per our site terms & conditions PLEASE READ
Author: Tony Bryant - Bryant Electronics
Nec Video Model: VN23
Will not wind / rewind
Observe Clutch and it looks like it won't stay on top of the `Pip' on the transverse plate which locks the clutch to allow full torque for wind operations
1. Check Clutch for wear - if it is really worn, change it
2. MORE LIKELY: Check the pin on the plate on top of the chassis, which is driven by the MAIN CAM - pin will probably be loose, in which case BRAZE it - superglue or peening it over will work for a few days then you'll get a call-back. Carefully Brazing it ONLY on the corner where the pin fits through the plate will provide a permanent fix.
Copyright © 2000 - 2003 - E.C.S (Technical Publishing)
Site Design & Layout © 2000
All Rights reserved
All Information is supplied as per our Site Terms.
Use of this site deems your acceptance of these terms.
Click links to view our Site Terms and Privacy Policy
|